Taper bushes
stainless
R3220 Stainless Taper Bushes
material: Stainless steel
Order No.
R3220.110
d1
tol. H9
11
d2
tol. h9
17
l1
22
l2
18.5
A/F
19
Thread
M15 x 1,0
Torque to
Nm
19
Torque
max.
Nm
18
£ 14.20 per unit (click for quantity discounts)
Ready to despatch 2
Need more? Manufactured within 10 working days from order. Typical UK delivery charge: £13.50. Confirmed at checkout.
Need more? Manufactured within 10 working days from order. Typical UK delivery charge: £13.50. Confirmed at checkout.
| Units | Price/unit after discount | Applied Discount |
| 1+ | £ 14.20 |
Technical & Application
Material
Stainless steel (A2, AISI 303).
Technical Notes
Used to easily and effectively achieve shaft/hub joints. Simple axial and radial fixing.
For applications such as fixing sprockets, gears, pulleys, cams, levers on to shafts.
Tips
Clean shaft and hub free from oil and dirt.
Rotate the nut until inner part protrudes approximately 3mm over the outer.
Install taper bush onto shaft, slightly tighten nut when located in desired position.
Compensate the axial off-set produced with a soft-faced mallet, and tighten.
